 |
Clip connectors for board-to-board (FPC) connectors
Product No.: CCBB series
Basic delivery timeframe
Design: 3 days
Manufacture: Ships on the 8th day after your approval of the diagram |
- This product is a tool that can be quickly attached or removed with a touch of your finger to or from the board-to-FPC (board) connector mounted in place on an FPC.
- Unlike jig connectors, this product uses a probe for high durability and no waste generation.
- Up to 60 pins in 0.4-mm pitch are supported.
- Compact and lightweight, this product can be handheld during use. (It can also be kept stationary.)
- This product is manufactured using polycarbonate resin preprocessed for lasting protection against static charge (except for the floating guide and pin block).
Recommended for use in the following cases:
Surface stiffening plate (top contact): the inspection item and the connector are mounted on the same plane (requires a connection to an extremely low-profiled connector)
Back stiffening plate (bottom contact): The inspection item and the connector are mounted on opposite planes (the inspection item and the connector are located in close proximity)
Features
 |
■Connector mounting displacement absorption structure
Due to a structure that guides the connector external form as it is inserted, inspections are unaffected by mounting displacement between the connector and board (FPC).
|
|
■Wide space for inspection item placement
The wide area allocated for mounting of the board (FPC) makes placing the inspection item easy.
■Wide opening area
The opening part is expanded to improve working efficiency.
■Probe protection structure
Surface stiffening plate: The guide shape is configured to prevent incorrect insertion of the inspection item.
Back stiffening plate: Since the guide tends to float, a structure has been adopted that prevents a probe from directly touching the connector when the inspection item is placed into position.
■ Floating lock mechanism
The guide part (floating guide) is configured so that it does not descend when the inspection item is placed into position. (Applies only at full-open time.) |
 |
 |
■Superior visibility
Height has been minimized, and the top front-end part is cut to improve visibility of the inspection item. By accounting for inspections by camera modules, we have devised a way to avoid affecting the angle of view.
* Angles of view up to 70° are supported even when the center of lens is close to a position 2.75 mm from the BtoB clip end face. |
 |
 |
■Probes can be swapped while leaving the base intact
Since the structure accommodates probes, when the base part is attached to an inspection device, the probe can be exchanged. This eliminates position adjustments at each probe replacement.
■Positioning pins installable
A 2-mm diameter hole is provided for positioning pins opened to allow precise placement at a desired position. |
Example of inspection work
As with conventional clip connectors, insert the target item to be inspected into the guide and clip into place. This completes the connection.
Probe contact position
Depending on the solidity of the solder applied, a probe with mild spring pressure is moved against the top of the connector terminal, rather than an instable connector lead.
Made to compact dimensions suitable for clip connectors for flex use
(M body)
Select from one of three wiring types.
Relationship between Pin Numbers and Fitted FRC Connectors
| Target pin number |
Connectors used |
| 10 to 32 pins |
HIF6-32PA-1.27DS |
| 34 to 40 pins |
HIF6-40PA-1.27DS |
| 42 to 60 pins |
HIF6-60PA-1.27DS |
■General specifications
- Maximum rated power: 10 W, max.
- Maximum rated current: 0.5 A
- Maximum rated voltage: 50 V AC/DC
- Withstand voltage: 100 V AC per minute
- Insulation resistance: 100 MΩ, min.
- Contact resistance: 500 mΩ, max. (contact part)
- Working temperature range: 0 to 85°C
Pad-fitted type for discrete wiring
 |
Pad-fitted type for discrete wiring
[surface stiffening plate]
Product No.: CCBB-040T-pin number
Specifiable range of pin numbers
(up to 60 pins)
Basic delivery timeframe
Design: 3 days
Manufacture: Ships on the 8th day after your approval of the diagram. |
 Click on the diagram to zoom in. FRC connector-fitted type
 |
FRC connector-fitted type
[surface stiffened]
Product No.: CCBB-040T-pin number-FRC
Also available are types made to wiring specifications that include FRC connectors. Please add -FRC to the end of product number when specifying.
Basic delivery timeframe
Design: 3 days
Manufacture: Ships on the 8th day after your approval of the diagram. |
Click on the diagram to zoom in. BtoB connector mounting pad-fitted type
BtoB connector mounting pad-fitted type [surface stiffened]
Product No.: CCBB-040T-pin number-BB
Also available are types made to wiring specifications that permit the mounting of BtoB connectors. The BtoB connectors used in the target item to be inspected can be mounted in place for wiring use. Add -BB to the end of product number when specifying.
Basic delivery timeframe
Design: 3 days
Manufacture: Ships on the 8th day after your approval of the diagram. |
Click on the diagram to zoom in. |
Click on the diagram to zoom in. Necessary connector dimensions
Send DXF data by e-mail, or send a diagram indicating the following dimensions:
| [A] External connector dimensions |
(1) Depth
(2) Breadth
(3) Width of protrusions
(e.g., claw)
(4) Position of (3) above
(5) Height of (3) above |
 |
| [B] Connector terminal dimensions |
(6) Distance between terminals
(flat places or terminal centers)
(7) Peak terminal height from lead surface
(8) Peak connector height from lead surface |
 |
[C] External flex dimensions and positional relationship
between connector and inspection item |
(9) Diagram showing at least external flex dimensions and rough configuration of the BtoB connector and adjacent periphery
* Flex thickness (including reinforcing plate)
Surface stiffening plate mandatory |
 |
[Compatibility range]
BtoB connectors whose dimensions are within the range shown below are compatible with this product. |
[Example of incompatible product]
If the target item to be inspected is in a condition shown below, this product cannot be used. |
 |
 |
Price list
- Discrete wiring pad-fitted type
- BtoB connector mounting pad-fitted type
| pin number |
Price〔＄〕 |
Addition price with FRC |
| 1 unit |
2-9 unit |
10-24 unit |
25-49 unit |
Over 50 unit |
| 10 |
617.00 |
612.00 |
603.00 |
596.00 |
590.00 |
+26 |
| 12 |
635.00 |
629.00 |
619.00 |
614.00 |
607.00 |
| 14 |
653.00 |
647.00 |
637.00 |
630.00 |
624.00 |
| 16 |
670.00 |
664.00 |
654.00 |
647.00 |
640.00 |
| 18 |
688.00 |
682.00 |
672.00 |
665.00 |
658.00 |
| 20 |
706.00 |
699.00 |
689.00 |
682.00 |
675.00 |
| 22 |
724.00 |
717.00 |
706.00 |
699.00 |
692.00 |
| 24 |
742.00 |
735.00 |
724.00 |
716.00 |
708.00 |
| 26 |
759.00 |
753.00 |
740.00 |
734.00 |
726.00 |
| 28 |
777.00 |
770.00 |
758.00 |
750.00 |
743.00 |
| 30 |
795.00 |
787.00 |
776.00 |
767.00 |
759.00 |
| 32 |
813.00 |
805.00 |
793.00 |
785.00 |
777.00 |
| 34 |
830.00 |
823.00 |
810.00 |
802.00 |
794.00 |
+33 |
| 36 |
848.00 |
840.00 |
827.00 |
819.00 |
810.00 |
| 38 |
866.00 |
858.00 |
845.00 |
836.00 |
827.00 |
| 40 |
884.00 |
876.00 |
863.00 |
854.00 |
845.00 |
| 42 |
902.00 |
893.00 |
879.00 |
870.00 |
862.00 |
+44 |
| 44 |
919.00 |
910.00 |
897.00 |
888.00 |
878.00 |
| 46 |
937.00 |
928.00 |
914.00 |
905.00 |
896.00 |
| 48 |
955.00 |
946.00 |
932.00 |
922.00 |
913.00 |
| 50 |
973.00 |
964.00 |
949.00 |
939.00 |
929.00 |
| 52 |
990.00 |
982.00 |
966.00 |
956.00 |
946.00 |
| 54 |
1008.00 |
998.00 |
984.00 |
974.00 |
964.00 |
| 56 |
1026.00 |
1016.00 |
1000.00 |
990.00 |
980.00 |
| 58 |
1044.00 |
1034.00 |
1018.00 |
1008.00 |
997.00 |
| 60 |
1062.00 |
1052.00 |
1036.00 |
1025.00 |
1015.00 |
* Depending on the quantity ordered, shipping may take several days. Please contact us for more information
* If the space between 2 rows of the pin block is less than 1.23 mm, 20US $ will be added as a narrow-pitch processing fee.
Discrete wiring pad-fitted type
 |
Discrete wiring pad-fitted type
[back stiffening plate]
Product No.: CCBB-040-pin number
Specifiable range of pin numbers (up to 60 pins)
Basic delivery timeframe
Design: 3 days
Manufacture:
Ships on the 8th day after your approval of the diagram. |
Click on the diagram to zoom in.
FRC connector-fitted type
 |
FRC connector-fitted type
[back stiffening plate]
Product No.: CCBB-040-pin number-FRC
Also available are types made to wiring specifications that include FRC connectors. Add -FRC to the end of product number when specifying
Basic delivery timeframe
Design: 3 days
Manufacture:
Ships on the 8th day after your approval of the diagram. |
Click on the diagram to zoom in.
BtoB connector mounting pad-fitted type
BtoB connector mounting pad-fitted type [back stiffening plate]
Product No.: CCBB-040-pin number-BB
Also available are types made to wiring specifications that permit the mounting of BtoB connectors. The BtoB connectors used in the target item to be inspected can be mounted in place for wiring use. Add -BB to the end of product number when specifying.
For the external appearance of the body of this product, see the diagram for discrete use.
Basic delivery timeframe
Design: 3 days
Manufacture:
Ships on the 8th day after your approval of the diagram. |
Click on the diagram to zoom in. |
Necessary connector dimensions
Send DXF data by e-mail, or send a diagram indicating the following dimensions:
| [A] External connector dimensions |
(1) Depth
(2) Breadth
(3) Width of protrusions
(e.g., claw)
(4) Position of (3) above
(5) Height of (3) above |
|
| [B] Connector terminal dimensions |
(6) Distance between terminals
(flat places or terminal centers)
(7) Peak terminal height from lead surface
(8) Peak connector height from lead surface |
|
| [C] Positional relationship between the connector and inspection item |
(9) Diagram showing at least rough configuration of the BtoB connector and adjacent periphery (including the height of the inspection item) |
 |
[Compatibility range]
BtoB connectors whose dimensions are within the range shown below are compatible with this product. |
[Example of incompatible product]
If the target item to be inspected is in a condition shown below, this product cannot be used. |
|
|
Price list
- Discrete wiring pad-fitted type
- BtoB connector mounting pad-fitted type
| pin number |
Price〔＄〕 |
Addition price with FRC |
| 1 unit |
2-9 unit |
10-24 unit |
25-49 unit |
Over 50 unit |
| 10 |
600.00 |
595.00 |
586.00 |
580.00 |
574.00 |
+26 |
| 12 |
618.00 |
613.00 |
604.00 |
597.00 |
590.00 |
| 14 |
636.00 |
630.00 |
620.00 |
614.00 |
608.00 |
| 16 |
654.00 |
648.00 |
638.00 |
632.00 |
625.00 |
| 18 |
672.00 |
665.00 |
655.00 |
648.00 |
642.00 |
| 20 |
689.00 |
683.00 |
673.00 |
666.00 |
659.00 |
| 22 |
707.00 |
700.00 |
690.00 |
683.00 |
676.00 |
| 24 |
725.00 |
718.00 |
707.00 |
700.00 |
693.00 |
| 26 |
743.00 |
736.00 |
725.00 |
717.00 |
709.00 |
| 28 |
760.00 |
754.00 |
742.00 |
735.00 |
727.00 |
| 30 |
778.00 |
770.00 |
759.00 |
752.00 |
744.00 |
| 32 |
796.00 |
788.00 |
777.00 |
768.00 |
760.00 |
| 34 |
814.00 |
806.00 |
794.00 |
786.00 |
778.00 |
+33 |
| 36 |
832.00 |
824.00 |
812.00 |
803.00 |
795.00 |
| 38 |
849.00 |
842.00 |
828.00 |
820.00 |
812.00 |
| 40 |
867.00 |
859.00 |
846.00 |
837.00 |
828.00 |
| 42 |
885.00 |
877.00 |
864.00 |
855.00 |
846.00 |
+44 |
| 44 |
903.00 |
894.00 |
880.00 |
872.00 |
863.00 |
| 46 |
920.00 |
912.00 |
898.00 |
889.00 |
879.00 |
| 48 |
938.00 |
929.00 |
915.00 |
906.00 |
897.00 |
| 50 |
956.00 |
947.00 |
933.00 |
923.00 |
914.00 |
| 52 |
974.00 |
965.00 |
950.00 |
940.00 |
930.00 |
| 54 |
992.00 |
983.00 |
967.00 |
957.00 |
947.00 |
| 56 |
1009.00 |
999.00 |
985.00 |
975.00 |
965.00 |
| 58 |
1027.00 |
1017.00 |
1002.00 |
992.00 |
982.00 |
| 60 |
1045.00 |
1035.00 |
1019.00 |
1009.00 |
998.00 |
* Depending on the quantity ordered, shipping may take several days. Please contact us for more information
* If the space between 2 rows of the pin block is less than 1.23 mm, 20US$ will be added as a narrow-pitch processing fee.
Product inquiries and placing orders
The CCBB series is designed to have guides fabricated individually for each order to match the customer’s connector. This means we cannot accept orders that specify only a product number. Please follow the procedure given below.
|
1
|
Complete “BtoB clip” inquiry sheet and specify the dimensions of the connector to be inspected. |
|
2
|
If we determine we can produce your order within this series based on the above information, we will provide a price and delivery timeframe, along with a Response Diagram Number and a Response to the Submitted Diagram, on the day your order is received. (Unless otherwise specifically requested, the terms and conditions presented in the catalogs will apply.) Please provide this Response Diagram Number in future discussions. |
|
3
|
A Guide-processing Diagram and an assembly diagram will be sent to you within 3 days. After confirming the drawings, return the Response to the Submitted Diagram included with our notification. Keep in mind that orders cannot be accepted until the drawing is approved. |
|
4
|
After diagram approval, complete the order sheet and submit by fax. Your order will be shipped on the 8th day after order receipt.
Note: Please confirm that the product no. and Response Drawing No. are both clearly indicated on your order sheet. |
|
