yokowo DS
Japanese version English version Chinese version Korean version
Product Introduction
Clip Connector for FPC/FCC
Features of clip connector
Standard series
>>FLASH version
>>HTML version
CCSE0.3mm pitch series
>>FLASH version
>>HTML version
> How to select the clip connector
> List of clip connectors
> General specification/usage
> How to wire
> Clip Connector Inquiry Sheet
> Just fit clip CCJF series
> Standard product series
> CCSE series
> CCMO series
BtoB Clip
> How to wire
> BtoB Clip Inquiry Sheet
BtoB Clip
> BtoB Stamp Inquiry Sheet
Clip connectors for thin-wire coaxial cable connectors
> How to wire
> Thin-wire coaxial cable connectors Inquiry Sheet
Push Pull Flexible Cable
Wiring Accessories Repair Parts
Push Pull Flexible Cable
Company Profile
Overseas Offices/Catalogue
Download of Order Sheet
Dummy connector of clip-type for the temporary contact to FPC/FFC wiring terminal is available in a short delivery leadtime even for small lot of orders, starting from 1 unit.
Micromedia Flash Player is required to see this Web site.
>>Click here to install Flash Player.
CCSE Series
NoticeF
Guides for the CCSE series of clip connectors are individually fabricated each time an order is received to suit the specified flexible cable. For this reason, they cannot be ordered simply by specifying a product no.

0.3mm pitch, matching pin number: 11 to 39 pins
(Clip with narrow pitch made to ZZ specifications)

Product no. : CCSE-030M-pin number-ZZ Discrete and flexible cable wiring type

Clip width : 24mm
Matching pin number : 11 to 39 pins
Delivery : Ships from Japan three days following order receipt (subject to payment confirmation).

Items included in this product set

♦ Wiring can be attached to this product by

  • Soldering a discrete wire
  • Connecting cable wiring to a 0.3 or 0.5mm flexible on-board cable connector

♦ Contains the three items listed below:

  • Clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
  • Guide and Flexible cable holding board lockscrew x 2 pcs.
  • Flexible cable holding board set (for back and front surfaces)

Click on the picture to extend it.
Appearance Basic wiring pattern Matching FPC terminal
  Provided for mounting a 0.5mm pitch FFC connector and Discrete wiring  
>> Click here for dxf data    
You may select circuit board for mounting 0.3mm pitch FFC connector.
Please specify the required board type in the "Clip Connector Inquiry Sheet".
*Unless stated otherwise, the "basic wiring pattern" will be delivered.

Price list

CCSE-030M-pin number (main body width 24mm)

pin
number		 Unit price (varies with quantity per single order) [US $]
1 unit 2-9 units 10-24 units 25-49 units 50 units
or more
11 223 206 166 147 120
12 226 209 168 149 123
13 229 213 172 153 125
14 233 216 174 155 127
15 236 219 176 157 129
16 239 223 179 159 132
17 243 225 182 163 134
18 246 228 185 165 136
19 249 232 187 167 138
20 253 235 189 169 139
21 256 238 193 173 142
22 264 244 196 176 145
23 272 252 203 182 150
24 279 259 208 187 155
25 287 266 215 193 160
26 295 274 220 199 165
27 303 282 227 205 170
28 310 288 234 210 175
29 318 296 239 216 180
30 326 304 246 223 185
31 334 310 252 228 190
32 339 315 255 230 193
33 345 320 259 235 196
34 350 326 264 239 199
35 356 330 268 243 204
36 362 336 273 247 207
37 367 342 277 252 210
38 373 347 282 256 214
39 378 352 286 259 218

>> CCSE Series product information >> Inquiries and order placement
NoticeF
Guides for the CCSE series of clip connectors are individually fabricated each time an order is received to suit the specified flexible cable. For this reason, they cannot be ordered simply by specifying a product no.

0.3mm pitch, matcing pin number: 11 to 39 pins
(Clip with narrow pitch made to ZZ specifications)

Product no. : CCSE-030M-pin number-FRC-ZZ FRC connector type

Clip width : 24mm
Matcing pin number : 11 to 39 pins
Delivery : Ships from Japan three days following order receipt (subject to payment confirmation).

Items included in this product set

♦ Wiring to the products in this series is accomplished using Hirose HIF6- series (2-piece, 1.27 pitch) connectors 32D, 40D, 60D, 80D, and 100D, respectively.
♦ Contains the three items listed below:
  • FRC connector-fitted clip connector main body (equipped with a guide manufactured to the customer-specified pin number)
  • Guide and Flexible cable holding board lockscrew x 2 pcs.
  • Flexible cable holding board set (for back and front surfaces)
♦ Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.

Click on the picture to extend it.
Appearance Basic wiring pattern Matching FPC terminal
>> Click here for dxf data    

Price list

CCSE-030M-pin number-FRC (main body width 24mm)

pin
number		 Unit price (varies with quantity per single order) [US $]
1 unit 2-9 units 10-24 units 25-49 units 50 units
or more
11 248 232 192 173 146
12 252 235 194 175 148
13 255 238 197 178 150
14 258 242 199 180 153
15 262 245 202 183 155
16 265 248 205 185 157
17 268 250 207 188 159
18 272 254 210 190 162
19 275 257 213 193 164
20 278 260 215 195 165
21 282 264 218 198 167
22 289 269 222 202 170
23 297 277 228 207 176
24 305 285 234 213 180
25 313 292 240 218 186
26 320 299 246 225 190
27 328 307 253 230 196
28 336 314 259 236 200
29 344 322 265 242 206
30 352 329 272 248 210
31 359 336 277 254 216
32 365 340 280 256 218
33 370 346 285 260 222
34 376 352 289 265 225
35 382 356 294 268 229
36 387 362 298 273 233
37 393 367 303 277 236
38 398 373 307 282 239
39 404 377 312 285 244

Inquiries and order placement

Guides for the CCSE series of clip connectors are individually fabricated each time an order is received to suit the specified flexible cable. For this reason, they cannot be ordered simply by specifying a product no. The procedure from inquiry to product delivery is described below.
1
 Complete the Clip Connector Inquiry Sheet to indicate the tip shape and size of the flexible cable to be inspected. To determine what information you need to provide in the submitted drawings, please refer to Request for Provision pf Flexible Cable Drawing.
2
 Based on the information provided, we will inform you whether your requested product in this series can be fabricated. If fabrication is possible, you will be notified of the price and lead times on the same day your request is received, with a Response Drawing No., a guide fabrication drawing, and a response to the drawing sent attached. (As stipulated in the site, unless otherwise requested) Please refer to this Response Drawing No. in subsequent correspondences.
3
 After confirming the guide fabrication drawing, please return the attached response to the drawing sent.
No orders will be processed until we receive your approval of the drawing.
4
 After submitting approval of the drawing, submit your order by facsimile using the order sheet. Ordered product will be delivered from Yokowo DS to the forwarder four days after we receive your order.
Note: Please confirm that the product no. and Response Drawing No. are both clearly indicated on your order sheet.

Request for Provision of Flexible Cable Drawing

Notice

The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
For the 19mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
For the 24mm wide clip connector, the maximum outside width of the FFC connector is 21mm.


Converter board, relay flat ribbon cable, repair probe/socket
♦ Converter boards and relay flat ribbon cables convenient for relay are available.
Accessories >>

*Provided for use with the 1.27 pitch relay flat ribbon cable (FCH series).

♦ Probes and sockets for repair are available.
Repair Parts >>
↑ To the top page
yokowoDS