yokowoDS

Actuator
Opener

NEW
item

Easy
Open!

Illustrations are color-coded for explanation,which is different from the actual product color.

AO-001

Before

Many workers in assembling sites typically wear gloves making it difficult to open an Flex circuit connector actuator with fingernails. Also, there were some cases where there is no space for fingers to enter because of high density mounting or because there are parts near the connector.

After

The actuator opener is a tool that makes the Flex circuit connector actuator open quickly without using fingernails.

How
to use

Lift hook with claw
Please rotate while doing.
With 1 turn Push plate is
It will go up and down
by 0.5 mm.

[Adjustment suggestions]
While letting the nail touch the actuator,
adjust by moving the push plate up and down
until it touches the surface of the connector.

●Extremely easy adjustments. (Strict adjustments are not necessary.)

Open the actuator by
gently rotating it.
By trying it 2-3 times,
you can operate it
right away.
No special skills needed.

It can be used when the distance
between the end face of the connector
and the mounting parts near the connector
is 1.5 mm or more.

Method of
exchange

Claw

Can be released by
removing only 2 screws.

4mm width
In many cases,
this alone will
suffice!
8mm width
when using
multipolar.
Unique
Shapes
for actuators with a steep angle.

Push-plate

Push plate can be
released by loosing
rear screws.

4mm width
In many cases,
this alone will
suffice!
8mm width
when using
multipolar.
Unique Shapes
For use when the flat part
between the edge of actuator
and main connector is deep.

■Product no.  AO-001

Price (for single-order quantities in US $)
1 unit 2~9 units 10~24 units 25~49 units 50 units or more
94 92 86 84 82
For large quantity orders, please contact us for price.

yokowoDS

TEL:81-3-3916-3141     FAX:81-3-3916-3139 
Copyright & Copy; 2017 YOKOWO CO.,Ltd All Rights Reserved.