HOME > Flex Circuit Inspection Tools INDEX > Clip connector CCSE Series > CCSE-030L-pin number(-FRC)

CCSE Series

CCSE Series

pins 40~59pins

3日

CCSE-030L-pin number

Discrete and flexible cable wiring type

CCSE-030L-pin number-FRC

FRC connector type

Product Overview

●The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
(This product's width is 33mm,pin number is 40 to 59 pins)
●The guide is processed individually to match the pin number and configuration specified by the customer.

Product Overview

●The products in this series are provided with an FRC connector for wiring use. ●The FRC connector included here is of the 1.27 mm pitch type. ●The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 100 pins configured as specified by the customer.
(This product's width is 33mm,pin number is 40 to 59 pins)
●The guide is processed individually to match the pin number and configuration specified by the customer.


● Transparent pin bloc
●Orange stopper

●Blue pin bloc
●Blue stopper

Provided for mounting a 0.5 mm pitch FFC connector and wiring discrete cable
■For cases involving
mounting
FFC connector
>>Learn more
●Transparent pin bloc
●Orange stopper

●Blue pin bloc
●Blue stopper

 
 
■With 60-pin FRC connector

Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
×
Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
× × × ×

Items included in this product set

● Items included in this product set
Contains the three items listed below:
・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

● Wiring can be attached to this product by ・Soldering a discrete wire・Connecting cable wiring to a 0.3 or 0.5 mm flexible on-board cable connector

Items included in this product set

● Items included in this product set
Contains the three items listed below:
・FRC connector-fitted clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

* Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.

● Wiring can be attached to this product by ・Wiring to the products in this series is accomplished using Hirose HIF6- series (2-piece, 1.27 pitch) connectors 32D, 40D, 60D, 80D, and 100D, respectively.

*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number. *No 0.3-mm pitch flexible connector provided for wiring.

※We also provide dimensions with
FRC connectors

When ordering a ZZ specification

*For products made to ZZ specifications, be sure to append -ZZ to the Product no.

CCSE-030L-59-ZZ CCSE-030L-59-FRC-ZZ

Notice

The circuit board forany clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
 For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
 or the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.

top of page

price list

CCSE-030L-pin number(-FRC)(Body width 33 mm)

Pin
number
Unit price (varies with quantity per single order) [US $]Additional
cost for FRC
Additional cost
for discrete
wiring*
1 unit2–9 units10–24 units25–49 units50 units or more
40384357290264222+34+86
41389363295268225
42395368299273228
43400373304276233
44406378308280236
45412384313285239
46417389317289243
47423394322293247
48428399326297250
49434405330302254
50439410335306257
51444413337308259
52448417340312263
53453422345315266
54457426348318268
55462430352322272
56466434355325274
57470438358328277
58475443363332280
59479447366335283

Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code "H".
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

● Volume discounts are available, based on the quantity purchased per order. ● Please note that delivery times are longer for orders of 10 units or more. Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.
>>Learn more
●Connector cables to this product are available.
>>Learn more

Product codes for different circuit boards

For cases involving mounting a connector for 0.3 pitch FFC

● There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.

Specify symbol D if the odd-numbered side
is at the front (to the left in the diagram below)
CCSE-030S-25D
Specify symbol D if the odd-numbered side
is at the front (to the left in the diagram below)
CCSE-030S-31R-ZZ

For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.

● No circuit board symbol needs to be specified. Please order using the conventional product no.

CCSE-030S-25  

For specifications in that discrete wiring is soldered by Yokowo
for the maximum number of pins for each body width

● Add the board code "H" to the end of the product code when ordering.

CCSE-030S-25H
(Wired with discrete wiring for 29 pins)
CCSE-030M-31H
(Wired with discrete wiring for 39 pins)
  *10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

On the Clip Connector Inquiry Sheet, please indicate your preferred method under the "Wiring method" column.
※Unless otherwise specified, the basic wiring pattern will be provided.

Wiring methoddrawing content

Lineup

  • 0.2mm series
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
    • CCSE-030 series
    • 11~29 pins
    • 30~39 pins
    • 40~59 pins
    • 60~101 pins
    • CCJF-030 series
    • CCJF-030M series
    • CCAC-030 series
    • CCSS-030 series
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

top of page