HOME > Flex Circuit Inspection Tools INDEX > Clip connector CCSE Series > CCSE-030M-pin number(-FRC)

CCSE Series

CCSE Series

pins 11~39pins

3days

CCSE-030M-pin number

Discrete and flexible cable wiring type

CCSE-030M-pin number-FRC

FRC connector type

Product Overview

●The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer. ●As in the past, pin number from 11 and over are availableeven for the 24 mm wide clip.●The guide is processed individually to match the pin number and configuration specified by the customer.

Product Overview

●The products in this series are provided with an FRC connector for wiring use. ●The FRC connector included here is of the 1.27 mm pitch type. ●The Products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number ranging from 11 to 100 pins configured as specified by the customer. ●Pin number from 11 and over are available for even the 24 mm wide clip. ●The guide is processed individually to match the pin number and configuration specified by the customer.


●Transparent pin bloc
●Orange stopper

●Blue pin bloc
●Blue stopper

Provided for mounting a 0.5 mm pitch FFC connector and wiring discrete cable
■For cases involving
mounting
FFC connector
>>Learn more
●Transparent pin bloc
●Orange stopper

●Blue pin bloc。
●Blue stopper

 
 
■With 40-pin FRC connector

Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
×
Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
× × × ×

Items included in this product set

●Contains the three items listed below: ・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

●Wiring can be attached to this product by ・Soldering a discrete wire ・Connecting cable wiring to a 0.3 or 0.5 mm flexible on-board cable connector

Wiring information on 0.5 mm pitch flexible cable
With the cover installed, up to 29 pins of 0.5 pitch flexible cable can be used. With flexible wiring of 30 to 39 pins, use CCSE-030L-pin number or CCSE-030L-pin number-ZZ.

Items included in this product set

●Contains the three items listed below: ・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

* Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.

●Wiring can be attached to this product by
・Soldering a discrete wire
・Connecting cable wiring to a 0.3 or 0.5mm flexible on-board cable connector

*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number. *No 0.3-mm pitch flexible connector provided for wiring.

※We also provide dimensions with
FRC connectors

When ordering a ZZ specification

*For products made to ZZ specifications, be sure to append -ZZ to the Product no.

CCSE-030M-39-ZZ CCSE-030M-39-FRC-ZZ

Notice

The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
 For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
 or the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.

top of page

price list

CCSE-030M-pin number(-FRC) (Body width 24mm)

Pin
number
Unit price (varies with quantity per single order) [US $]Additional
cost for FRC
Additional cost
for discrete
wiring*
1 unit2–9 units10–24 units25–49 units50 units or more
11223206166147120+26+57
12226209168149123
13229213172153125
14233216174155127
15236219176157129
16239223179159132
17243225182163134
18246228185165136
19249232187167138
20253235189169139
21256238193173142
22264244196176145
23272252203182150
24279259208187155
25287266215193160
26295274220199165
27303282227205170
28310288234210175
29318296239216180
30326304246223185
31334310252228190
32339315255230193
33345320259235196
34350326264239199
35356330268243204
36362336273247207
37367342277252210
38373347282256214
39378352286259218

Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code "H".
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

●Volume discounts are available, based on the quantity purchased per order. ●Please note that delivery times are longer for orders of 10 units or more. Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.
>>Learn more
●Connector cables to this product are available.(It is designed for use with the 1.27 pitch FCH Series.)  
>>Learn more

Product codes for different circuit boards

For cases involving mounting a connector for 0.3 pitch FFC

●There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.

Circuit board for connectors on which pins on
the odd-numbered side are positioned at the front:
CCSE-030S-25D
Circuit board for connectors on which pins on
the even-numbered side are positioned at the front:
CCSE-030S-31R-ZZ

For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.

●No circuit board symbol needs to be specified.  Please order using the conventional product no.

CCSE-030S-25 

For specifications in that discrete wiring is soldered by Yokowo
for the maximum number of pins for each body width

●Add the board code "H" to the end of the product code when ordering.

CCSE-030S-25H
(Wired with discrete wiring for 29 pins)
CCSE-030M-31H
(Wired with discrete wiring for 39 pins)
 *10-color discrete wiring with core diameter of 0.24 mm, external insulation diameter of 0.54 mm,
wire length of 300 mm from board edge, and ends stripped to a length of 3 mm.

On the Clip Connector Inquiry Sheet, please indicate your preferred method under the "Wiring method" column.
※Unless otherwise specified, the basic wiring pattern will be provided.

Wiring methoddrawing content

Lineup

  • 0.2mm
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
    • CCSE-030 series
    • 11~29 pins
    • 30~39 pins
    • 40~59 pins
    • 60~101 pins
    • CCJF-030 series
    • CCJF-030M series
    • CCAC-030 series
    • CCSS-030 series
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

top of page