HOME > Flex Circuit Inspection Tools INDEX > Clip connector CCSE Series > CCSE-030X-pin number(-FRC)

CCSE Series

CCSE Series

pins 60~101pin

3日

CCSE-030X-pin number

Discrete and flexible cable wiring type

CCSE-030X-pin number-FRC

FRC connector type

Product Overview

●The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
(This product's width is 44mm,pin number is
60 to 101 pins)
●The guide is processed individually to match the pin number and configuration specified by the customer.

Product Overview

●The products in this series are provided with an FRC connector for wiring use. ●The FRC connector included here is of the 1.27 mm pitch type. ●The products in this series are produced from a 19, 24, 33, or 44 mm wide clip mother body, with pin number rangingfrom 11 to 101 pins configured as specified by the customer.
(This product's width is 44mm,pin number is
60 to 100 pins)
●The guide is processed individually to match the pin number and configuration specified by the customer.


●Blue pin bloc
●Blue stopper

For mounting a 0.5 mm pitch FFC connector and discrete wiring

■For cases involving mounting FFC connector >>Learn more


●Blue pin bloc
●Blue stopper

■ 61pin to 80pin=80pins
81pin to100pin=100pins

Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
×
Wiring method
Discrete connector
Pre-wired Wired by customer FRC Mounting connector Mounted by customer
× × × ×

Items included in this product set

●Contains the three items listed below: ・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

●Wiring can be attached to this product by ・Soldering a discrete wire
・Connecting cable wiring to a 0.3 or 0.5 mm flexible on-board cable connector

Items included in this product set

●Contains the three items listed below: ・Clip connector main body (equipped with a guide manufactured to the customer-specified pin number) ・Guide and Flex(FPC) cable holding board lockscrew x 2 pcs. ・Flex(FPC) cable holding board set (for back and front surfaces)

* Note that the FRC connector used in this product is the HIF6-32, 40, 60, 80, or 100PA-1.27DS connectors made by Hirose Electric.

●Wiring can be attached to this product by ・Soldering a discrete wire
・Connecting cable wiring to a 0.3 or 0.5 mm flexible on-board cable connector

*For products in this series, probes are configured and guides are fabricated with respect to the center of the connector to suit the specified pin number. *No 0.3-mm pitch flexible connector provided for wiring.

※We also provide dimensions with
FRC connectors

Notice

The circuit board for any clip width in this series is available as a conventional 0.5 pitch flexible cable connector mountable board or as a 0.3 pitch connector mountable board. Keep in mind that the 0.5 pitch flexible cable connector may not be compatible with flexible cable connectors outside a certain range of widths.
 For the 19 mm wide clip connector, the maximum outside width of the FFC connector is 16mm.
 or the 24 mm wide clip connector, the maximum outside width of the FFC connector is 21mm.

top of page

価格表

CCSE-030X-pin number(-FRC)(Body width 44 mm)

Pin
number
Unit price (varies with quantity per single order) [US $]]Additional
cost for FRC
Additional cost
for discrete
wiring*
1 unit2–9 units10–24 units25–49 units50 units or more
60484452369338286+45+146
61488455373342288+53
62493459376345292
63497464380348295
64502468384352297
65506473387355300
66510476390358303
67515480394362306
68519485398365309
69524489402368312
70528494405372315
71533497407374317
72536500410376319
73540505414379322
74544508416383324
75548513420386327
76552516423388329
77556519426392332
78559523429394334
79564527433397337
80567529434399338
81572534438403342+59
82575537440405344
83579540444408346
84583544447410348
85587548450414352
86590552453416354
87595556456419356
88598559459423358
89603563463426362
90606566465428364
91609569468430366
92613573470433368
93616576474436370
94619579476438373
95623582478440375
96626585482443377
97629588484446379
98633592487448382
99636595489450384
100639598492453385
101643602495456387

Discrete wired specification products have discrete wires soldered by Yokowo for the maximum number of pins for each body width.
Please order with board code "H".
*10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

●Volume discounts are available, based on the quantity purchased per order. ●Please note that delivery times are longer for orders of 10 units or more. Contact probes and guides(manufactured to suit the specified number of pins) are available as repair parts.
>>Learn more
●Connector cables to this product are available.(It is designed for use with the 1.27 pitch FCH Series.)  
>>Learn more

Product codes for different circuit boards

For cases involving mounting a connector for 0.3 pitch FFC

●There are two types of circuit boards: ones for connectors on which pins on the odd-numbered side are positioned at the front and ones for connectors on which pins on the even-numbered side are positioned at the front. Referring to the example below, append the corresponding circuit board symbol to the name of the product you are ordering.

Specify symbol D if the odd-numbered side
is at the front (to the left in the diagram below)
CCSE-030S-25D
Specify symbol D if the odd-numbered side
is at the front (to the left in the diagram below)
CCSE-030S-31R-ZZ

For cases involving discrete wiring or mounting a connector for 0.5 pitch FFC.

●No circuit board symbol needs to be specified. Please order using the conventional product no.

CCSE-030S-25  

For specifications in that discrete wiring is soldered by Yokowo
for the maximum number of pins for each body width

●Add the board code "H" to the end of the product code when ordering.

CCSE-030S-25H
(Wired with discrete wiring for 29 pins)
CCSE-030M-31H
(Wired with discrete wiring for 39 pins)
  *10-color discrete wiring.
・Core diameter 0.24 mm, external insulation diameter 0.54 mm
Wire length 300 mm from board edge, ends stripped to length of 3 mm

n the Clip Connector Inquiry Sheet, please indicate your preferred method under the "Wiring method" column.
※Unless otherwise specified, the basic wiring pattern will be provided.

Wiring methoddrawing content

Lineup

  • 0.2mm
    • CCJF-020M series
  • 0.25mm
    • CCJF-025M series
  • 0.3mm
    • CCSE-030 series
    • 11~29 pins
    • 30~39 pins
    • 40~59 pins
    • 60~101 pins
    • CCJF-030 series
    • CCJF-030M series
    • CCAC-030 series
    • CCSS-030 series
  • 0.4mm
  • 0.5mm
  • 0.8mm
  • 1.0mm
  • 1.25mm
    • CCS-125 series
  • CCPO series
    • CCPO series
  • PFC series
  • repair parts
  • maintenance
  • Actuator Opener
  • HIROSE FH-58 Flex Insertion Tool

top of page