::: yokowo DS [Clip connector CCAC series ] :::

HOME > Flex Circuit Inspection Tools INDEX > Clip connector CCAC series

CCAC series

■Clip connector that closes automatically (making pin contact) when a flexible printed circuit is inserted. ■The clip is open by default for ease of use when handling test items that must be held with both hands. ■The width is machined to dimensions suitable for the number of pins to allow use with flexible printed circuits arranged side by side or in confined spaces. ■The locking mechanism is designed to withstand approximately 50,000 open/close cycles.
(This is a guideline figure, not a guarantee.)

Relationship between the specified number of pins and body width

●Body width (dimension A) differs depending on the specified number of pins. Please refer to the table below. ●When the shape of the flexible cable is straight, the body width as shown in the following table applies.
Because the width varies according to the shape of the flexible cable, please contact us for details.

※For products in this series probes are configured and guides are fabricated with respect to the center of the connector to suit the specified number of pins; however, it is possible to perform an inspection on only one side in a confined space by pulling the probe array to one side. Please contact us for details.

top of page

●Click the product no. to see more information about each product.

Discrete wiring and flexible cable wiring types

Pitch	Matching pin number	Dmension A	Product no.	Wiring method
				Discrete		Connector
				Pre-wired	Wired by customer	FRC	Mounting connector	Mounted by customer
0.3mm	6 to 10 pins	8mm	CCAC-030-pin number	×	○	×	○	○
	11 to 19 pins	10mm
	20 to 25 pins	12mm
	26 to 31 pins	14mm
	32 to 39 pins	17mm

Discrete wiring and flexible cable wiring types

Pitch	Matching pin number	Dmension A	Product no.	Wiring method
				Discrete		Connector
				Pre-wired	Wired by customer	FRC	Mounting connector	Mounted by customer
0.4mm	4 to 33 pins	17mm	CCAC-040-pin number	×	○	×	○	○

Discrete wiring and flexible cable wiring types

Pitch	Matching pin number	Dmension A	Product no.	Wiring method
				Discrete		Connector
				Pre-wired	Wired by customer	FRC	Mounting connector	Mounted by customer
0.5mm	4 to 7 pins	8mm	CCAC-050-pin number	×	○	×	○	○
	8 to 12 pins	10mm
	13 to 15 pins	12mm
	16 to 19 pins	14mm
	20 to 24 pins	17mm

※The discrete wiring specification requires an increase in the body width of about 4 mm for the rear portion.

A convenient holder is provided for use when holding
the Auto Close Clip.

Product set contents

●Holder
●M2 x 5　countersunk screws (x2)

Price (for single-order quantities in US $)
1 unit	2 to 9 units	10 to 24 units	25 to 49 units	50 units or more
28	20	17	14	12