HOME > Connector Inspection Tools > Small Gauge Coaxial clipconnectors CCDJ Serises

v

Connector Inspection Tools

Clip connectors for thin-wire coaxial cable connectors

CCDJ series

three days/eight days

CCDJ-030-pin number

CCDJ-040-number

Product overview

Clip connectors for thin-wire coaxial cable connectors■This inspection jig is easily attached to and removed from the "Small gauge coaxial clip connectors" used for liquid crystal display connections in cell phones and video cameras. ■A wide range of pin counts up to 52 pins in 0.3-mm pitch , in addition to 40 pins in 0.4-mm pitch, are now supported. (Not usable for some connectors of vertical type where the exposed plane of terminals is on only inside, and for those whose terminals are configured in zigzag form.)

Features

Connectable to GND by a touch of your finger
Since a GND connecting plate is provided in the guide part and the tool is connected to the board with spring connectors located on both sides of pin block, the connector and GND can be connected by simply clipping. Furthermore, a connection is possible even for connectors that have GND contacts on only the reverse side.
The whole of the GND contact part is plated with gold.

0.3 mm pitch 0.4 mm pitch

Wiring with small gauge coaxial cable possible
Designed to be wired using thin-wire coaxial cable, this product has had connector mounting patterns provided on its board. For the 0.4-mm pitch version, furthermore, this product is usable for either straight or crossed case of pin assignments of connectors on both ends.

Contrivances for improved characteristics
Measures are incorporated to improve characteristics using probes that are short in length, while at the same time adopting wiring patterns with superior shielding effects for the wiring board.
Wiring pads are provided on the reverse side for use in connecting signal wires, which are likened to GND, to the connector and common GND.

Compact body
Finished up in a compact size, contributing to the increased freedom of jig layout.


Download the outline drawing

The example characteristics are only an example representing the results of measurements made at our company and not meant to guarantee the performance of any product concerned.

If a probe embedded in the pin block made of plastic is likened to G-S-G, then a 50Ω impedance is secured for up to the tip of the probe. The adjacent signal patterns are isolated in the inner layer of the board by GND to reduce crosstalk.

return loss insertion loss
crosstalk  

top of page

general specification

0.3mm pitch

Maximum rated power MAX.4W
Maximum rated current 0.3A
Maximum rated voltage 50V(AC/DC)
Withstand voltage AC100V/1min
Insulation resistance Min.100MΩ
Insulation resistance Min.100MΩ (contact part)
Working temperature range 0~85℃

0.4mm pitch

Maximum rated power
MAX.10W
Maximum rated current 0.5A
Maximum rated voltage 50V(AC/DC)
Withstand voltage AC100V/1min
Insulation resistance Min.100MΩ
Insulation resistance Min.100mΩ (contact part)
Working temperature range 0~85℃

price list

0.3mm pitch
 request pin number:CCDJ-030-pin number

pin
number

Price(for single-order quantities;in US $)
1unit 2to9
units
10to24
units
25to49
units
50units
or more
10475470464459454
11489485477473468
12504499492487482
13519515507502496
14534529520516510
15549545536530525
16564558550545539
17579574565559554
18594588579574567
19609604595588583
20624618608603596
21639634624617612
22654648638632625
23669663653646639
24684677667660654
25698692682675667
26714707696689683
27728722710704696
28744737726718710
29758752739733725
30774767755747739
31788780769762754
32804796784776768
33818810798790782
34834826814805797
35848840827819810
36864856843834826
37878870857848839
38894885872863854
39908899886877868
40923914900890882
41938929915906897
42953944929920910
43968959945935925
44983974958949939
45998989974964954
461,0131,003988978968
471,0281,0181,003993983
481,0431,0331,0171,007996
491,0581,0481,0331,0221,012
501,0731,0631,0461,0361,025
511,0881,0781,0621,0501,039
521,1031,0931,0761,0651,054

0.4mm pitch
 request pin number:CCDJ-040--pin number

pin
number
Price(for single-order quantities;in US $)
1unit2to9
units
10to24
units
25to49
units
50units
or more
10425422415410406
11439436429425420
12454449443438434
13469465458454449
14484479473467463
15499495487483477
16514509502496492
17529525517512506
18544539530525519
19559554546540535
20574568560554548
21589584575569564
22604598589583577
23619614605598592
24634628618613606
25648643633626619
26664658648642635
27678672662655648
28694687677670663
29708702692684677
30724717706699692
31738732720713706
32754747736728720
33768762749742734
34784776765757749
35798790779770763
36814806794786778
37828820808799792
38844836824815806
39858850837828820
40873865852843834

Depending on the quantity ordered, shipping may take several days. Please contact us for detailed information.
Volume discounts are available and are determined based on the quantity of a single order .
For orders for 10 or more units, please allow several days for shipping.
Contact probes and probe guides (fabricated each time to suit the connector you're using) are available as repair parts.
See the table of repair parts for details.
The customer is expected to provide the thin-wire coaxial cable used for wiring.

Wiring method

lineup

  • BtoB clip
    • CCBB series 60pins
    • CCBB-040T-pin number
    • CCBB-040T-pin number-FRC
    • CCBB-040T-pin number-BB
    • CCBB-040-pin number
    • CCBB-040-pin number-FRC
    • CCBB-040-pin number-BB
    • BM22
  • BtoB stamp
    • BBSP-040-pin number
    • BBSP-040-pin number-FRC
    • BBSP-040-pin number-BB
  • interface connector
    • KN-HDM
    • KN-HDM-D
    • KN-HDM-MN
    • KN-HDM-MC
    • KN-USM
    • KN-USM-D
    • KN-USM-3
    • KN-USM-3-D
    • KN-USM-MC
    • KN-USM-MC-D
    • KN-USM-C
    • KN-DSP
    • KN-DSP-MN
  • small gauge coaxial clip connector
    • CCDJ-030-pin number
    • CCDJ-040-pin number
  • repair parts
  • maintenance

top of page