HOME > Connector Inspection Tools
 >9-pin SuperSpeed Type AInterface Connectors for General-purpose USB Easy Connection Tools for Interface Connectors

9-pin Universal Serial Bus Easy Connection Tools for Interface Connectors For Standard-A(Super Speed)

9-pin SuperSpeed Type A Interface Connectors for General-purpose USB Easy Connection Tools for Interface Connectors

Sameday

KN-HDM

KN-HDM-D

General Specifications

Maximum rated current 1.8A
Maximum rated voltage 30V DC
Operating temperature range 0~85℃
This product must be inserted horizontally into the receptacle connector.

Download

●This USB interface connector accommodates rapid and repeated connection/disconnection.●Because it does not lock in the same way as conventional connectors, connection/disconnection is very easy. The KN-USM-3-D bottom-mounted output connector type shown below has been added to accommodate two vertically aligned connectors. ●Because the connector terminals cannot contact the terminal just before the connection pins are inserted into the back of the connector jig, damage is avoided and safe testing is assured. ● We also offer tools for removing dust from the jig terminals.

Download

price list

product code Price(for single-order quantities;in US $)
1unit 2to9 units 10to24 units 25to49 units 50 units or more
KN-USM-3
KN-USM-3-D
86 85 82 78 70

maintenance

DRS-USM

Daily maintenance
●This tool is designed to clean the terminal contacts of the KN-USM-3,KN-USM-3-D easy connection tool for the general-purpose 9-pin interface connector. ●Simply insert this product into the KN-USM-3,KN-USM-3-D . The adhesive area of this product contacts the terminals of the KN-USM-3,KN-USM-3-D and any dirt attached to the terminal is transferred to this product. ●Designed to be used every 3,000 cycles, this product should be used on a regular basis. Continued use of a soiled connection tool will result in the soil becoming embedded in the terminals. Such embedded dirt cannot be removed even with this product. ●To ensure the extended service life of this product, simply wash off the adhering dirt with water and allow to naturally air dry. This revives the adhesive property and ensures this product can be reused repeatedly.

Price list

product code Price (for single-order quantities;in US $)
1unit 2to9 units 10to24 units 25to49 units 50 units or more
DRS-USM 43 42 40 39 36

maintenance

KN-USM-3-RP

●This product is the tip of the pin block section, which contacts and slides against the connectors.

●We recommend this part be tested and replaced after every 100,000 cycles, depending on the usage conditions.

Price list

product code Price (for single-order quantities;in US $)
1unit 2to9 units 10to24 units 25to49 units 50 units or more
KN-USM-3-RP 26 25 24 23 20

lineup

  • BtoB clip
    • CCBB series
    • CCBB-040T-pin nnumber
    • CCBB-040T-pin nnumber-FRC
    • CCBB-040T-pin nnumber-BB
    • CCBB-040-pin nnumber
    • CCBB-040-pin nnumber-FRC
    • CCBB-040-pin nnumber-BB
    • BM22
  • BtoB stamp
    • BBSP-040-pin nnumber
    • BBSP-040-pin nnumber-FRC
    • BBSP-040-pin nnumber-BB
  • interface connector
    • KN-HDM
    • KN-HDM-D
    • KN-HDM-MN
    • KN-HDM-MC
    • KN-USM
    • KN-USM-D
    • KN-USM-3
    • KN-USM-3-D
    • KN-USM-MC
    • KN-USM-MC-D
    • KN-USM-C
    • KN-DSP
    • KN-DSP-MN
  • small guage coaxial clip
    • CCDJ-030-pin nnumber
    • CCDJ-040-pin nnumber
  • repair parts
  • maintenance

top of page