HOME > Microwave inspection tools > Probe Index > Calibration Probe FCP-CAL Series

function probe

function probe

Calibration Probe

FCP-CAL Series

Same day

FCP-CAL Series

COUP-202

Nominal Specifications

Wiring Spec. G-S-G
Distance between pins 0.5mm
Frequency Range DC~6GHz
Return Loss 20dB

Nominal Specifications

Wiring Spec. Short
Distance between pins 0.5mm
Frequency Range DC~10GHz
Return Loss 0.5dB

Frequency Property

Frequency Property

Click on the picture to expand it.

Use and Features

●Function Probe to calibrate the network analyzer including the wiring circuit on the board. ●Properties of mounted parts can be measured more accurately because the loss of the wiring circuit on the board is calibrated. ●It can be used for 50 Ω standard of TDR measurement. ●2 types of 50 Ω probe for short and load ●Pitch is 0.5 mm.

How to measure

PrerequisiteConnect the network analyzer to the connector of the board to be calibrated, and check that no part is mounted on the place to be calibrated. (Refer to Figure 1.) How to calibrateCalibrate the network analyzer.
(1) Measure OPEN when nothing is connected to the calibrated point. (Figure 1)
(2) Measure SHORT between the calibration point of the short probe and GND. (Figure 2)
(3) Measure LOAD with load probe. (Figure 2)
(4) Valid CAL after finishing calibration.
The above process completes calibration on the board. The calibrated phase is where the probe is attached.
Actual MeasurementMeasurement mounting the parts obtains S parameter without the board. (Figure 3)

top of page

example

We offers RF tast table for use easily and reliably .>>Learn more

price list

Product Product code. Package unit Price (By total quantity per order): US$
1unit 2 to 4 units 5 units or more
Function probe
(For Load)
FCP-CAL-L 1 piece 456 445 434
Function probe
(For Short)
FCP-CAL-S 1 piece 456 445 434
Function probe
(Load & Short set)
FCP-CAL-SET 1 piece each 900 873 845

・Please order those products by product number. ・Bulk discount is given at the time of order. ・Duties and Taxes are not included in the price above.

Lineup

  • Function probe
    • Calibration Probe
    • CPHF-R
    • CPHF-C
    • FCP-CH
    • Coaxial Probe
    • Variable GND Probe
    • Variable-Pitch Defferential Probes
    • High Impedance probe
    • DC Cut Probe
    • Coaxial Probe with 3 point or coaxial land inspection
    • Coaxial Probe
    • Defferential Probes
    • Radio Wave Probes
    • Calibration Adaptor
  • Microwave Compornent
  • Probe Connector
    • Probe Connector
    • TRL calibration board for the probe connector SMA
  • Giga Holder
    • Giga Holder
    • Option for Giga Holder
  • RF Test Table
  • Double Probing Table
  • Giga Cable
    • GC Series
    • GCNS Series
    • SC Series

top of page